1200 winckoke and spanner wrench.

What gauge do you need? I think that I have som 20ga Winchokes and a wrench.

Sorry I should have specified 12 gauge. I have never used winchokes before so I am not sure if the wrench is interchangeable or not. Do you?

Rick

They seem to be interchangeable. I have some here, some with 20 tubes and some with 12 tubes. There are no gauge markings on the wrenches and they appear identical.

Jeremiah

:idea: Check out one of these!
Sporting Clays Speed Wrench
http://www.carlsonschokes.com/accessories.html#e

:arrow: A universal fit so will work with any choke tube within gauge (12 or 20), made by several makers and usually around $20 bucks. Best darn wrench I've ever used, both with my (12 gauge) browning invector or Rem-choke systems.
Really nice to only have to deal with just one wrench and it's fast too! 8)

You need to decide on which tubes you want, and will end up getting as there were three styles of Winchokes. One had only external lugs to tighten with, one had both internal and external, and one just internal----this is the most popular tube and all of it goes in the barrel.

These are the style I am referring to. This wrench is interchangeable for 12 ga/ 20 ga. as far as I can tell.

Winchoke Wrench
http://images.outdoorinteractive.net/mgen/287783_d.jpg?is=200,200,0xffffff&cvt=jpg

Winchoke Tubes
http://www.kitterytradingpost.com/product.php/pid/103/sid/651/prodid/7001

Jeremiah

FullandFuller said:

These are the style I am referring to. This wrench is interchangeable for 12 ga/ 20 ga. as far as I can tell.

Winchoke Wrench
http://images.outdoorinteractive.net/mgen/287783_d.jpg?is=200,200,0xffffff&cvt=jpg

Winchoke Tubes
http://www.kitterytradingpost.com/product.php/pid/103/sid/651/prodid/7001

Jeremiah

Click to expand...

:arrow: Exactly what is on my sons old youth model 1200 we bought for him a good 23 years ago. Other then the one I recommended I don't think your in luck.
I do know that spanner wrench has got to be the [email protected] setup they could come up with. :roll:

try emailing [email protected]. He runs a place called Double Gun Shop. I needed some of the old 20 gauge 1st version winchokes and he has an inventory of them and spanner wrenches .

I have the wrench for the external knurled end tubes, a full, I.C. 12 ga. tube and the red plastic package they came in. P.M. me and we'll strike a deal if this is what you need.