Shotgun Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
11 Posts
Thanks for sharing!
The TSS really bring the 410 out of the dark ages.
Been going to order some TSS to try, your vid confirmed I need to place an order!
If you don't mind what are details of you load... roll crimp or crimp etc....
 

· Registered
Joined
·
11 Posts
Shot some geese yesterday with handloads of 3” .410 250-273grain of tss8’s and some duplexed tss8/hw15 6’s.
That's awesome!
Would love to know your load recipie..... can p.m. me if you don't want to broadcast it.

What kind of range can you drop them with the TSS?
I read on TSS page they were hammering geese @ 70 yds or something to that effect?

Thanks for any info!
 

· Registered
Joined
·
303 Posts
That's awesome!
Would love to know your load recipie..... can p.m. me if you don't want to broadcast it.

What kind of range can you drop them with the TSS?
I read on TSS page they were hammering geese @ 70 yds or something to that effect?

Thanks for any info!
They were decoying shots 20-35yards on the geese I shot. The ones on the far right and far left are large, almost the size of the dog or a Bigfoot original goose.

I’ll verify the load data and share, 3” Federal hulls, win 209 primer, TPS wad, 250-273gn HW15 6, or TSS 8’s., fold crimp. I’ll look and see if I used LilGun or H110 in these.

ATI crusader OU, 26” barrels, mod and improved mod chokes.
 

· Registered
Joined
·
303 Posts
I’m thinking about trying to figure out a 2 1/2” TSS load.

.410


Cheddite 2-1/2" primed


23 gr. Alliant 300 MP Powder


2 × 1/8" .410 nitro card over powder


TUWG2741 wad or MG410 wad


3/8 oz 18g/cc shot


Overshot card roll crimp


1510 fps, 6135 psi

I’ve made the same with h110 and LilGun variations using hw15 shot, 0.5oz
Sky Automotive tire Cloud Motor vehicle Grass
 
1 - 12 of 12 Posts
Top