Shotgun Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
4,858 Posts
Brownells sells a tool to cut the rivet heads off from the inside so you don't have to reblue. It leaves enough of the rivet so you can re-peen the ejector back on.

it is part number 080-000-040

it may or may not work, I havn't used it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top