Shotgun Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
2,880 Posts
Discussion Starter · #1 ·
SOLD
I've got an extra 24 inch barrel that will fit the
12ga Benelli Supersport, Sport II, Legacy, Raff, Monte or Cordoba.

It's a raised rib like the Monte barrels.
Not quite as high as the Supersport barrel.

It's in very good condition but it's seen some use.

It really turns a Supersport, Sport II or Corboba (that only come with 28-30") into a much handier gun with no porting.

SOLD
ADDED: Takes Beretta Mobilchokes and I have several to chose from for an added $10.

Thanks, Roger.
 

·
Registered
Joined
·
13,098 Posts
The upper reciever on these models are unlike the Black Eagle and Super Black Eagle. Instead of being attached to the barrel like the BE and SBE, these others have a tube that slides over the barrel extension and locks the barrel to the back of the receiver.
 

·
Registered
Joined
·
12,362 Posts
If it would fit an M1 or M2, which will interchange, even being a bit different, I would be all over it!

Clyde
 

·
Registered
Joined
·
12,362 Posts
Yes, I knew it would not fit.

What I meant about the M1 and M2 is that their barrel extensions are also different from each other, but will still interchange with themselves.

I have a 26 in. M1 that I would like to trade/replace with a 21 or 24 inch barrel.

And a 28 in. M2 barrel that I would like to sell.

Clyde
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top