Shotgun Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
593 Posts
Hi Willard:

You said you "took trigger apart". How far? After getting the Tang Piece Assembly out of the receiver, did you also drive out the pins that hold the Hammer and Sear in place? If so, maybe the Sear Spring got lost? (It's the small coil spring that is positioned under the front of the Sear).

On the other hand, if all parts are present and in their proper place, maybe the notch in the Hammer or the front lip of the Sear is chipped or broken.

If you could post photos, that would be a great help.

Best regards,

Jeff
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top