Shotgun Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
7,059 Posts
Most likely you can have the stock bent. Check on the gunsmithing forum. Mike Orlen, one of the moderators there, does stock bending. There are othe people that can do it also. Basically they can heat the stock in hot oil and bend it to the final shape that you need. Depends a little on the grain in the wood as to whether they will try it.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top