Shotgun Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
100 Posts
Discussion Starter · #1 ·
I have an over and under 12 ga., that is marked as follows:

Dan //Arms-of-North America.
Allen town-Pennsylvania-USA
Made in Italy
Finito

I assume this gun was made by Finito, and imported by Dan //Arms.
It looks to be a decent gun, but not in a class with Brownings, or equal.

If anyone knows about these gun please reply.
 

·
Registered
Joined
·
383 Posts
Italian guns are usually good.

Finito (similar to finished) just means that the gun was proof tested after it was finished. It goes on many italian guns.

from the BOOOOOK

Previous trademark of shotguns manufactured in Italy by Silma. Previously imported by Dan Arms of America located in Allentown, PA and by Dan Arms of North America (previously called Sportsman´s Emporium Ltd.) located in Fort Washington, PA

Their value is less than $300

if you look here:

http://store.bluebookinc.com/downlo...A&CategoryName=SHOTGUNS:+O/U&Link=534&Level=1

you can get a more accurate estimate of your guns value.

If you post all markings on the guns barells and action we can, hopefully, help with some details of the gun (age, proof pressure etc)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top