Shotgun Forum banner
1 - 4 of 4 Posts
G

·
Discussion Starter · #1 ·
:oops: This is gonna sound stupid so please bear with me. I have just purchased a new Wincheser Super X2 28 inch and it has the vent rib that is higher in the back than in the front (if you have one you know what im talking about) Ive not had a chance to shoot it yet so Im not quite sure how to sight it. Do you sight down the rib like normal or is there some funky way of doing things?
 

·
Registered
Joined
·
476 Posts
Just aim normal.
 

·
Registered
Joined
·
285 Posts
Dale, not a stupid question at all--that's how things are learned.

Most shotguns that have ribs are 'higher in the back than in the front'. They are designed that way so they will shoot somewhat 'high', but only marginally so.

This is so that you can, for example, place the barrel at the bottom or under the bird (keeping it fully in sight) and the shot pattern will cover the entire bird. Otherwise if you wanted the pattern to cover the entire bird, you may have to cover some of the bird with the barrel.

Most shotguns shoot what is called a 60-40 pattern, that is 60% of the pattern is above the actual line of shight and 40% is below. Some guns are altered (trap guns mostly) to shoot a 70/30 or even a 80/20 pattern--depending upon the desires of the shooter.

But, don't worry about it, you have a fine gun--enjoy it.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top