Shotgun Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #1 · (Edited)
Been fighting the final crimp for a while on some 2 3/4 remington hulls,using a mec 600 jr mark v. I adjusted the cam and punch best i could, and this is what I ended up with (see attached pictures) any tips or pointers would be nice.. yes, I know one is swirled a little bit, that was the first of that batch before I started adjusting
Finger Wood Drinkware Nail Bottle
Glove Wood Gas Tin can Flooring
 

· Registered
Joined
·
7,618 Posts

· Premium Member
Joined
·
572 Posts
The crimps look pretty good really. The hulls might be just a tad overfilled. I like to measure from the top of the hull to the top of the stack inside the hull just before the crimp. How much plastic is left? If its less that .375, your stack might be a bit high leading to some of the bulging I see. Wads will compress to some degree and compensate for stack height. Some wads have more range than others. Maybe post your load details and and that measurement.
 
1 - 12 of 12 Posts
Top