Shotgun Forum banner
1 - 3 of 3 Posts
G

·
Discussion Starter · #1 ·
I am looking for supplies/parts dealer for a Pacific reloader. The charge bar/reloader is currently set up for 20 ga. 3" with 33 grs powder and 1 1/4 oz no. 5 lead.

My father just gave me the loader and I would like to reload bismuth or hevi shot and need to know where to start.

I have used this loader many time with it's current set up, but there's not much use for lead in Southern LA.

any help would be appreciated.

Mark
 

·
Registered
Joined
·
20,519 Posts
Pacific was bought out by Hornady quite a few years ago. The Hornady 366 is a refined version of the old Pacific loader. Many of the parts on the two loaders are interchangeable. Contact Hornady for parts. Some parts such as bushings and the new spring loaded primer seaters are available from http://www.gamaliel.com
 
G

·
Discussion Starter · #3 ·
I did contact Hornady, and I can get the bushings I need.

I guess what I really need is a "recipe" for a 20 ***** 3" magnum hevi-shot or bismuth load. Then Hornady can get the bushings I need, I guess. :?

Mark
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top