Shotgun Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
607 Posts
Take the pin out of the front of the magazine by using a small screwdriver and pusing it against the little spring inside of it. Then take the two screws out on each side of the end of the magazine. Make sure to keep pressure on the end, or it will come flying out....that's always fun!

Matt
 

·
Registered
Joined
·
607 Posts
when you pull the pin out all the way out and turn it around you'll see a little groove inside the pin, in the pin there's a spring that holds it inside the magazine. Push on the little groove and pull out while you push on it. It will come out then. I always keep the two screws in there and pull the pin out first, it keeps pressure off the pin and you don't have it flying out while your hands are full.

Matt
 
1 - 4 of 4 Posts
Top