Shotgun Forum banner
1 - 1 of 1 Posts

363 Posts
As Wade said i would use the Hevi data.

The one load that I have had good success with is the the Quicksilver II.

It uses the Fio hull (multi hull will work).

I don't think you need the 3" hulls. If you use the 3" hulls it will need a lot of fillers. 1 1/4 oz should be fine.

My favorite wad for this application is the CLBC. The R+ and Multi Metal (with the thicker wad petals) gave me to tight of patterns. These pellets, as you know, already pattern tight. So a more open choke and a wad you can slit gives better patterns. At least for me.

Good luck.

I'm going to send you a PM
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.