Shotgun Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Does anyone know of any options to increase the LOP on the SBE3? Looking for an additional 3/4" roughly.
 

·
Registered
Joined
·
10 Posts
You can get up to about 14.75 with their thickest recoil pad for $100. Or you can buy a Limbsaver 10810 prefit pad that comes with a special block to fit inside the stock and screw the pad to. This setup will only yield about 14.6". But you can insert a pad spacer from Brownells between the pad and the special block. Brownells sells hard rubber spacers in several thickness. You will need longer screws too.

You could also try this
https://www.benellistockspacer.com/
Mine took about 6 weeks to get to the USA
 
1 - 2 of 2 Posts
Top