Shotgun Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
612 Posts
Discussion Starter · #1 ·
I am a proud new owner of a Silver Pigeon IV, Field Grade, 12 *****, 28 inch barrel, 3 inch chamber. It is new in box (though the store didn't do a good job on cleaning :( ) and comes with 5 factory mobilChokes, Gel-Tek recoil pad and a set of extra front sights (green/red). The current MSRP is about $2800 and I got it at a discounted price of $2100 ( ... 2200 out the door).

Is that an OK, good or smoking deal? :)

Since I cant post pictures on this forum here are a couple of links from beretta website:

http://products.berettausa.com/frame_ta ... igeon%20IV

http://www.beretta.com/index.aspx?m=74&idc=1&ids=23

Appreciate your comments..
 

·
Registered
Joined
·
612 Posts
Discussion Starter · #3 ·
So can just start shooting with it or is it a good idea to give it a good cleaning first? Can I just remove the greasy stuff with a towel or use some kind of cleaner?
 

·
Registered
Joined
·
612 Posts
Discussion Starter · #8 ·
I got the Hoppes #9 and here's what I did: cleaned the barrels with a couple of cotton patches, ran 3-4 patches soaked in #9, finally ran the bronze brush and some dry patches again. The barrels are shiny :) Now I can go have fun in the field with peace of mind :D Once again this forum is one my best finds! Thanks a million.

Just a word of caution about using Hoppes #9 from FAQs on Beretta USA website:
"Use caution if using Hoppes #9 on nickel plated parts. Many manufacturers have found that Hoppes #9 will damage nickel finished parts if it left in contact with the parts for any length of time. "

As instructed I made sure to use #9 in the barrel bores only. Which part(s) on a beretta silver pigeon are nickel plated?

I also spoke with beretta customer rep and I was told that the Beretta Lubricating oil that comes with the gun does have some cleaning ingredients in it. He also suggested using Birchwood Casey product for cleaning other metal parts Action/Receiver/Fore-end/monoblock etc. So I also bought a can of Birchwood Casy product called "Barricade" Rust Protection for Firearms.

For now I am just gonna stick with Beretta oil for outside metal parts and Hoppes #9 for the bores.
 

·
Registered
Joined
·
612 Posts
Discussion Starter · #10 ·
BTW I am really surprised that the owner's manual doesn't cover all this stuff since the first cleaning is so important. ARE YOU LISTENING BERETTA ???
 

·
Registered
Joined
·
612 Posts
Discussion Starter · #11 ·
bopper said:
I should have mentioned it in my first posts but make sure to oil the gun after using any solvent. Any solvent will strip the gun of oil and leave it susceptible to rust.
You mean use gun oil even inside of the barrel bores?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top