Shotgun Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
263 Posts
a "universal" set of uncle mike's qd swivels will work fine--you must drill out the fore-end cap to the right size and drill a pilot hole in the stock--go slow and be careful if it's synthetic so it doesn't crack--also don't tighten the stock screw down with the swivel attached, it will break
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top