I am having a heck of a time removing a stuck Colonial flush mount choke tube in a 20 ga. I have tried heat and soaking in penetrating oil and no luck so far. One significant problem is finding a suitable choke wrench. The Colonials have 2 opposing slots about .075 or .080 wide. This seems to be narrower than Carlson-Truchoke (who make what looks like a good wrench) and other makes. I checked with Carlson and their tubes have .125 slots. Colonial recommends a quarter, but a quarter is soft and distorts without moving the tube.
Has anyone experience with the Bad**s tool sold on Ebay ($69)? It appears to be a set of three closely fitting tools (for full, modified and ic chokes) like an easy-out, but with less severe serrations or threads.
Any other suggestions on a tool?
Has anyone experience with the Bad**s tool sold on Ebay ($69)? It appears to be a set of three closely fitting tools (for full, modified and ic chokes) like an easy-out, but with less severe serrations or threads.
Any other suggestions on a tool?
