Shotgun Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
I need to remove the stock on a 20 ga Browning Superposed to clean out the gunk that must be built up inside. When shooting the upper barrel first the lower barrel will not fire next. But when firing the lower barrell the upper fires next just fine. I hope a good cleaning will cure this problem. Is the bolt inside the stock all that needs to be removed in order to access the action? Do the screws in the tang need to be removed? Your help is appreciated.
 
1 - 1 of 1 Posts
Top