Shotgun Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,282 Posts
The trigger pull can be reduced on the Weatherby via a new return spring from m*carbo. It should be the same as for the Mossberg but you can inquire first. It is a DIY job for about $15.

Your cycling issues are IMO at least somewhat related to the Winchester Universal ammo. Those are infamous for causing issues with semi autos. The Federal equivalents from my experience are a bit better. I know it is tough being picky right now but the Federal stuff is also available at Walmart.

Try the Federal promo stuff or some other brand if possible before making up your mind on reliability.

Good info. Thank you.

 

·
Registered
Joined
·
5,282 Posts
I believe it is but I would check with M*carbo to see if they could make sure. Also, ask on the gunsmith forum and see if anyone here has direct experience with that model. Worst case scenario you order it and it does not fit so you have to send it back. Small expense to try.

Randy also recommends an outfit that can fix it professionally. See below. Good luck!

 
1 - 2 of 2 Posts
Top