Shotgun Forum banner

Unique powder reloading question

1484 Views 11 Replies 9 Participants Last post by  valkyrierdr
Any one have a link showing which bushing to use with my MEC9000 to drop the right amount of powder for this recipe:

Win. AA hull, 7/8 ounce shot, 16 grs. Unique, RXP20 wad, Win. 209 primer.

1 - 2 of 12 Posts
Just use the No. 24 bushing. An average difference of .3 of a grain less than the prescribed 16 will have negligible effect on the ballistics.

If you measured exact charges of 15.7 and 16 grains in 10 loads each, mixed them up and shot them, you'd never be able to identify which was which.
1 - 2 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.