Shotgun Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
8,218 Posts
Well Equismith, when did you get the 12 ga. reloader. Holding out on me, Huh. :D What happened to the 155 loader? Didn't like it?

Heck, you might not even talk to me after my post about the pumps. :shock:
 

·
Registered
Joined
·
8,218 Posts
HuntNshoot, As Equismith said in his post my brother loads 3" .410's.

The only problem he says he has is, they will crumple very easily if you aren't very careful putting the final crimp in.

To much pressure an they will wrinkle, not enough an you get a poor final crimp.

The problem with the 3"er's is they are so long an skinny there is nothing to support the hull on the final crimp.

Also wads for the 3" hulls are next to impossible to find, they don't make them anymore. Everybody that I know just uses the wads made for the 2 1/2" shells, leaving the shot exposed above the top of the wad. Don't have a clue what that does to patterns though.

Hoashooter does have some 3" wads for sell, or did. If you're interested, send him a pm.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top