Shotgun Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
I am wondering how much effect the primer has on velocity and pressure. Here is my dilemma:
I am new to reloading and have done a lot of reading on the subject, studied the various manufacturers website for recipes and read a lot of this forum. I decided on a 1 oz. 12 gauge load, 1200 fps to start off on:
Remington Gun Club hulls (I have quite a few once fired from the local club)
Rem. 209P Primer
WAA12SL Wad
18.0 grains Red Dot.

I picked up a pound of Red Dot and a bag of windjammer II clone wads but the shop did not have any Rem. primers so I figured I could find a recipe using Win. primers so I bought 1000 of them. When I got home I looked up the Red Dot recipes and couldn't find one for these components. I went shopping today for the Rem. primers but nobody in town seems to have them.
So finally I come to my questions, if I were to substitute the Win. primers in the above recipe, what kind of change could I expect? The above recipe is rated at 9600 psi, would the change in primer increase this to unsafe levels? Should I decrease the powder charge to be safe? Or should I forget this idea and mail order some Remington primers?

Thanks for your help

Rick
 

·
Registered
Joined
·
104 Posts
Discussion Starter · #4 ·
Thanks everyone,
OKShotgunner said:
Now the first thing I'm wondering about is why you picked up a bag of clone Windjammer II wads (CB4118-12B?).
Sorry, I guess I worded that incorrectly in my original post. I meant I picked up a bag of the Windjammer II wads, from what I am told and have read here these load just like the WAA12SL wads.

The load you listed is straight out of the Alliant Powder Reloaders' Guide, 2004 edition, page 15, or off their website. As you noted that recipe called for the WAA12SL (pink) wad in conjunction with the Remington 109P (STS) primer.
It is from the wedsite, but it says to use the Rem. 209P primer, is this the same as the STS primer?

Thanks
Rick
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top